Cork Solutions

How To Install Cork Wall Tiles – A Comprehensive Guide

Cork wall tiles are an excellent choice for adding both functionality and style to your interior spaces. These tiles are not only eco-friendly but also offer great thermal and acoustic insulation. A pleasant do-it-yourself project that improves the comfort and appearance of your house is installing cork wall tiles. We will take you step-by-step how to install cork wall tiles in this detailed guide, including everything from setup to cleaning.

Equipment and Supplies You Will Require

Before you begin the cork wall installation, gather the necessary tools and materials:


·         Measuring tape

·         Pencil

·         Level

·         Utility knife

·         Putty knife

·         Fine-grit sandpaper

·         Paint roller

·         Paintbrush

·         Trowel

·         Rubber mallet


·         Cork wall tiles 

·         Adhesive (cork-specific or contact cement)

·         Primer

·         Wall filler or spackling compound

·         Sealer (polyurethane or cork-specific)

·         Paint (if desired)

·         Cork trim or molding (optional)

·         Adhesive remover (for cleanup)

Step 1: Preparing the Wall

Measure and Mark: Measure the wall’s dimensions and mark the area where you plan cork wall tile installation. Use a level to ensure your lines are straight and square.

Prepare the Surface: Inspect the wall for any imperfections, such as holes or cracks. Fill these imperfections with wall filler or spackling compound and sand them smooth once they’re dry.

Priming the Wall: Coat the wall with primer and let it air dry completely. The primer improves adhesion and ensures an even surface for the adhesive.

Step 2: Cutting Cork Tiles

Measure and Mark: Measure the area you want to cover with cork tiles and mark the dimensions on the tiles. You can use a pencil for this.

Cut Tiles: Use a sharp utility knife to cut the cork tiles along the marked lines. Verify that the wall is neat and clean of any dust or rubbish.

Step 3: Applying Adhesive

Mixing Adhesive: If you’re using a substance designed specifically for corks, combine it according to the manufacturer’s directions. For contact cement, apply it directly to the back of the cork tiles.

Starting Point: Work your way down or across the wall, starting at one of its corners, usually at the top. The initial tile and the wall where it will be placed should both have a layer of sticky applied to them.

Press and Smooth: To prevent air bubbles from being trapped, gently press the tile onto the glue, working your way down from the top.

Maintain Spacing: Leave a small gap between tiles for expansion and contraction, typically around 1/16 to 1/8 of an inch. You can use spacers to ensure even spacing.

Continue: Repeat the process, adding adhesive and tiles in rows or columns until the entire wall is covered. Be sure to check the level of each row or column to maintain a straight and level installation.

Step 4: Sealing and Finishing

Seal the Cork: Once the adhesive has dried, typically after 24 to 48 hours, apply a coat of sealer to the cork tiles. This not only protects the cork but also enhances its appearance.

Paint (Optional): After sealing, you can paint the cork tiles if you’d like. For even paints application, use a paint roller and brush. Let it air dry before adding another coat, if needed.

Trim and Molding (Optional): To finish the edges and corners, you can use cork trim or molding. Measure and cut the trim pieces, then apply them to the edges with adhesive.

Step 5: Cleanup and Maintenance

Clean Up: Use adhesive remover to clean any excess adhesive on the tiles or wall. Wipe down the tiles and the surrounding area to remove any residue.

Maintenance: Cork wall tiles are relatively low-maintenance. Generally, it is enough to dust frequently or give it a light cleaning with a wet cloth. Cork can be harmed by employing harsh cleansers or too much wetness.

How to install cork tiles on a wall? Installing cork wall tiles is a satisfying project that can transform your space. You may create a stunning and useful cork wall that enhances the aesthetics and comfort of your house with careful planning and attention to detail. Cork tiles provide an environmentally sustainable and stylish answer for your home design needs, whether you’re covering a full wall or adding a detail.

Can Cork Wall Tiles Be Removed and Replaced If Needed?

Cork wall tiles are a popular choice for adding both functionality and style to your interior spaces. They are a desirable alternative for both designers and homeowners due to their aesthetic appeal, quiet advantages, and eco-friendly qualities. But you might be considering whether it’s possible to take out and replace cork wall tiles if necessary.  Let’s explore the process of removing and replacing cork wall tiles and the considerations involved.

Removal of Cork Wall Tiles

Removing cork wall tiles can be a straightforward process, but it requires careful handling to avoid damaging the tiles or the wall. Here are the steps for removing cork wall tiles:

1. Gather Tools and Materials: You will need a few tools and materials for this process, including a putty knife, adhesive remover, a cloth, and replacement cork tiles (if necessary).

2. Start at a Corner: Begin at a corner of the cork wall tile you wish to remove. Insert the putty knife between the tile and the wall, being cautious not to gouge the wall surface.

3. Gently Pry and Lift: Gently pry the cork tile away from the wall using the putty knife. Work gradually and be patient, especially if the tile is well-adhered.

4. Adhesive Residue: There can be secure residue left on the wall as well as the tile after the tile has been removed. Use sticky remover and a towel to remove any leftover adhesive from the tile. For the wall, ensure it’s clean and smooth for the installation of the new tile.

Replacement of Cork Wall Tiles

If you need to replace cork wall tiles due to damage or wear and tear, here are the steps to follow:

1. Assess the Area: Before replacing the tile, assess the condition of the wall and any surrounding tiles.

2. New Tile Selection: Select a new cork tile whose size, style, and color compliment those of the original tiles.  If the tiles are from a specific manufacturer or collection, try to find a close match.

3. Installation: Follow the installation steps for cork wall tiles, as outlined in the manufacturer’s guidelines or general installation procedures. Apply adhesive to the back of the new tile and press it into place.

4. Alignment and Spacing: Pay attention to alignment and spacing, ensuring the replacement tile blends seamlessly with the existing tiles. Use spacers if needed to maintain even spacing.

5. Allow for Drying: Give the adhesive time to dry and set, typically after 24 to 48 hours. Avoid touching or placing any weight on the tile during this period.


In conclusion, cork wall tiles are a helpful and flexible option for interior design because they can be taken down and changed as needed. You can preserve the aesthetic appeal and practicality of your cork wall surface for many years to come with the correct equipment and supplies, careful handling, and close attention to detail. Replacing cork wall tiles is an easy project that lets you take advantage of cork’s long-term advantages, whether you’re fixing minor damage or reworking your décor.

    Your Cart
    Your cart is emptyReturn to Shop